How to Resurface Concrete: The Ultimate Guide

How to Resurface Concrete The Ultimate Guide

Your concrete driveway, patio, or pool deck is starting to look a little rough. It’s not just an eyesore, but it can also be dangerous. A trip or fall on uneven concrete can cause serious injury.

Do you have a concrete driveway, patio, or porch that’s seen better days? Resurfacing your concrete is the solution. This process will fix any cracks or chips in your concrete and give it a fresh look. Best of all, it’s much cheaper and easier than replacing the concrete altogether.

If you’re thinking about resurfacing your concrete, you’ve come to the right place. Follow our guide to learn how to resurface concrete in just a few simple steps, as well as about suitable resurfacing compounds and many more things. Let’s dive in!

What is Concrete Resurfacing?

Resurfacing concrete is a process that fixes any cracks or chips in your concrete and gives it a fresh new look. It’s much cheaper and easier than replacing the concrete altogether, so resurfacing it may be the best option if your concrete is starting to show its age.

Without the hassles of a total replacement, concrete resurfacing may give your outdoor and indoor surfaces a fresh look. The procedure is simple and saves you money in the long run if you were to pour new concrete over your existing surfaces.

Benefits of Concrete Resurfacing

There are many benefits to resurfacing concrete, including:

  • Improving the look of your concrete: If it is starting to look a little worn down, resurfacing it can give it a fresh new look.
  • Fixing cracks and other damage: Resurfacing concrete can also fix any cracks or further damage that may have occurred.
  • Preventing further damage: By resurfacing your concrete, you can avoid any further damage from occurring.
  • Saving money: Resurfacing concrete is much cheaper than replacing it altogether.
  • Decorative Finish: Concrete resurfacing also provides a variety of decorative finishes that allow you to customize the appearance of your floors and concrete surfaces.

Different Types of Resurfacing Compounds

Resurfacing concrete is a process that can be used to fix cracks, restore surface texture, and add color or a decorative finish to concrete surfaces. There are a variety of different products that can be used for resurfacing concrete, including

  • Epoxies ( These can be applied in various ways, such as troweling, brushing, and spraying).
  • Coatings (Different coatings can be used to resurface concrete, including acrylics, latexes, urethanes, and polyurethanes).
  • Mortars (Mortars are typically used to repair cracks, restore surface texture, and add color or a decorative finish to concrete surfaces).

Before choosing a product, it’s essential to consider the condition of the concrete surface, the desired finished appearance, and the climate conditions where the resurfacing will occur.

A Good Resurface Compound Should have:

When looking for a quality resurface compound to use on concrete, it is important to consider the following factors: adhesion, abrasion resistance, color stability, and texture. Some compounds also include a sealant which can help protect the concrete from weathering and staining.

1. Adhesion

Adhesion is an important quality to look for in a resurfacing compound. The compound should bond well to the concrete so that it does not peel or flake off.

2. Abrasion Resistance

Abrasion resistance is another important quality to look for. The resurface compound should be able to withstand heavy foot traffic and resist being worn away by the elements.

3. Color stability

Color stability is important if you want the resurfaced area to match the surrounding concrete.

4. Texture

The texture is also an important consideration. Some resurface compounds can create a smooth, polished finish, while others can create a more textured look.

When choosing a resurface compound, it is important to consider the specific needs of your project. Consider the above factors to choose a compound that will produce the best results.

5 Steps for Resurfacing Concrete

There are a few basic steps that are involved in resurfacing concrete. The exact steps may vary depending on the resurfacing compound used, but the following steps provide a general overview of the process.

1. Preparation of Surface

Begin by ensuring that the concrete surface is structurally sound and free of cracks larger than 1/4 inch deep or wide. Any necessary surface repairs should also be completed in this step. The most crucial phase in resurfacing concrete is surface preparation.

It entails cleaning the surface thoroughly to remove oil, grease, and other substances with a strong acid, detergent, or bleach solution. After that, the surface is cleaned using a 3,500 psi pressure washer to remove any deteriorated concrete and to open up the concrete’s pores that aid in forming a secure bond between resurfacing and fixing.

2. Apply a Primer to the surface

A primer is typically applied to the surface before the resurfacing compound is used. The primer helps to improve the bond between the resurfacing compound and the concrete surface.

After preparing the surface, a primer is applied to help the resurfacing compound bond to the concrete. The type of primer that is used will depend on the type of resurfacing compound that is being used.

Types of Primer used are:

  • Acrylic bonding agent
  • Epoxy resin
  • Latex-based primer
  • Polyurethane primers

These primers should have a minimum tensile strength of 200 psi and be able to resist at least 20 cycles of freeze-thaw.

3. Applying of Resurfacing Compound

After the primer has been applied, the resurfacing compound can be mixed and applied to the surface. The resurfacing compound is usually applied with a trowel or roller.

  • Scrub the material with a long-handled squeegee in one-foot wide strips across the surface of the concrete.
  • Apply enough pressure to work the substance into the surface pores and create a general 1/8-inch thickness.
  • Apply the resurfacer with a masonry brush to hard-to-reach corners and edges. The resurfacer should not be overworked.
  • Use a concrete finishing broom to sweep the resurfaced concrete perpendicular to traffic for a textured, non-skid surface immediately after applying the resurfacer.
  • The majority of the time, one coat of resurfacer is enough to cover the existing concrete surface.
  • If a second coat is required, allow the first coat to sit undisturbed until it can support light foot traffic, and then apply it.

4. Finishing of Surface

After the resurfacing compound has been applied, it needs to be finished. The type of finish that is used will depend on the desired look and feel of the surface. Some standard finishes include:

Trowel finish: This finish is achieved by running a trowel over the surface of the resurfacing compound while it is still wet. This produces a smooth, polished look.

Broom finish: It is achieved by sweeping a broom over the surface of the resurfacing compound while it is still wet. This produces a textured, non-skid surface.

Stamped finish: This can be attained by using a stamping tool to create patterns in the resurfacing compound while it is still wet. This can produce a variety of looks, ranging from a brick pattern to a stone pattern.

5. Curing of Surface

After the resurfacing compound has been applied and finished, it needs to be cured. The curing process helps prevent the compound from cracking and chipping and improves the overall strength of the surface.

The best way to cure the resurfacing compound is with a curing blanket or plastic sheeting. The curing blanket or plastic sheeting should be kept for at least three days. After that, the surface can be used as usual.

Resurfacing concrete is a great way to update the look of concrete surfaces without having to replace them entirely. By following these steps, you can resurface concrete yourself and save money.

 

Is your apartment patio cracking? Resurface concrete with Valet Works. Valet Works Construction is your one-stop shop for all your concrete needs. We specialize in resurfacing, repairing, and maintaining all types of concrete surfaces. We have the experience and expertise to get the job done right, on time, and on budget. Contact us today for a free consultation.

Scroll to Top